HOA Structural Renovation Specifics Edit page

OAK SHADOWS HOA STRUCTURE SPECIFICATIONS

ALL UNIT EXTERIORS MUST BE ‘RENOVATED’ WITH THE FOLLOWING SPECIFICATIONS AND MATERIALS.

LOCATE ANY DAMAGED WOOD/SIDING. SCRAPE STRUCTURE’S OLD PAINT WHERE NEEDED. REPLACE THE DAMAGED WOOD WITH NEW WOOD AS FOLLOWS:

5/8” T-111, CEDAR TRIM, ½” WOOD SHEETING REPLACING 

DAMAGED SOFFITS, 1”X2” COVERING ON EACH SOFFIT SEAM, 

1”X4” CEDAR TRIM OVER ALL T-111 SEAMS,

USING SHERWIN WILLIAMS PRODUCTS:

CAULK & SEAL: REMOVE ALL OLD CAULK AND APPLY PREMIUM ACRYLIC SEALANT “PRISTINE” TO ALL SEAMS AND EDGES. CAULK ALL SEAMS BUTTING UP TO WOOD THAT WE PAINT.

PRIME (BRUSH ON) THE NEW RAW WOOD & SCRAPED WOOD, WITH EXTERIOR ACRYLIC WOOD PRIMER.

POWER WASH ENTIRE STRUCTURE.

APPLY 2 COATS OF SHERWIN WILLIAMS DURATION EXTERIOR LATEX SATIN PAINT ON ALL EXTERIOR WOOD AND FENCES.

‘URBANE BRONZE’, 7048, ON ALL ABOVE AND INCLUDING
GUTTERS, SOFFITS, FASCIA’S, CHIMNEY, VENT PIPES,
DOWNSPOUTS AND ON BOTH FENCE SIDES.

HOMEOWNER WILL THEN CHOOSE THEIR SIDING COLOR FROM THE HOA SELECTION OFFERED.

ALL TRASH & EXTRA MATERIALS MUST BE CLEARED FROM THE PROPERTY.

NO WORK VEHICLES CAN BE PARKED ON PROPERTY OVERNIGHT.

WORK VEHICLES CANNOT IMPEDE ALLEYS OR FIRELANES OR HOMEOWNERS’ RIGHT-OF-WAYS.